alpha Medical plaster – High
The technical specifications of gypsum alpha Medical, Excellent for fixing broken elements, good balance between mechanical properties and smoothness , Heliopolis alpha plaster working in medical purposes and dental
Chemical Specifications
Constituents | Typical PCT |
---|---|
Crystal water | 5 : 7 |
Hemi-hydrate “ Caso4.½ H20” | 94.00 min. |
Insoluble Residue | 1.00 max. |
Fe2O3 | 0.07 max. |
Cl | 0.015 max. |
CaO | 37 : 38 |
So3 | 52 : 54 |
Moisture | 0.00 |
Physical Properties
Degree of whiteness | 96 min |
---|---|
Water / plaster ratio | 25 -100 % |
Initial setting time | 15 : 20 minutes |
Final setting time | 30 – 35 minutes |
Fluidity | 150 – 240 mm |
Water absorption | > 8 % |
Bending strength | >99 kg/cm2 |
Compressive strength | >325 kg/cm2 |
Fineness, Retained On sieve ( 325 mesh) | zero |
Packing:
in 25 30 & Kg. Paper or P.P. bags as the standard product, and/or according to the customer requiremen
Diamond Joint Filler
Diamond White powder composition ready to be mixed with water to form high performance white slurry used for pasting and soldering separators of the gypsum boards .
Applications
Paste gypsum board separators and cracks for smoothing the surface over the all applications . To obtain a several decorative texture over all building surfaces instead of paints . Leveling and lining the surface of plaster as it can reach 5 mm thick.
Technical Specifications:
Density | 1.55 kg/L |
---|---|
Coverage | 3200 M2/ton/0.5mm thickness |
Mechanical Properties
Compressive strength | 2.5 N/MM2 |
---|---|
Flexural strength | 1.5 N/MM2 |
Surface hardness | 1.2 N/MM2 |
PH | About 7 |
Setting time | 60 Minutes or more as request |
Mixture life ( 25 °c ) | 45 Minutes |
Packing:
25 ±2 kg
STORAGE & SHELF LIFE:
Store in a dry place. JOINT FILLER Gypsum will remain usable 12 months from date of manufacture
Heliopolis Gypsum Plaster POP (SINA Gypsum)
(Gypsum plaster & Gypsum binder for building)
Description:
Heliopolis gypsum “is a high quality gypsum extracted from Sinai rocks- with 98% whiteness used for cornices and decorative forms moulding, Pre-cast cornices, Gypsum forms, Pre-cast cornices , Optimum for big size cornices and forms moulding which need medium setting times.
Chemical Specifications:
Constituents | Typical PCT |
---|---|
Crystal water | 5 : 7 |
Hemi-hydrate “ Caso4.½ H20” | 94.00 min. |
Insoluble Residue | 1 .00 max. |
Fe2O3 | 0.07 max. |
Cl | 0.015 max. |
CaO | 37 : 38 |
So3 | 52 : 54 |
Moisture | 0.00 |
Physical Properties of the product:
Degree of whiteness | 96 % |
---|---|
Water / plaster ratio | 100 -125 % |
Initial setting time | 7: 13 minutes |
Final setting time | 24 – 35 minutes |
Fluidity | 250 – 320 mm |
Water absorption | >32 % |
Bending strength | >35 kg/cm2 |
Compressive strength | >90 kg/cm2 |
Fineness, Retained On sieve ( 100 mesh) | < zero % |
APPLICATIONS:
1-construction and finishing processes | 2-decorative products |
3-production of compound fertilizers and paints | 4-production of gypsum panels |
5-gypsum spray and blocks | 6-cement alternative |
QUALITIES:
1-bright white | 2-fire resistant |
3-superior softness | 4-high level of endurance |
5-sound and heat barrier | 6-health-safe material |
Packing:
in 40 Kg. plastic bags as the standard product, and/or according to the customer requirements
Hard finish gypsum wall putty
PRODUCT DESCRIPTION:
Hard finish gypsum putty is a ready-to-use, multi-purpose joint filler, made of high quality binders and selected non-toxic fillers. It is suitable for a wide range of interior and weather protected exterior areas for non-structural filling, achieve smooth and seamless walls and ceilings. The ready-to-use gypsum putty is easy to apply making it ideal for simple home renovations and do-it-yourself fixes. It can be used over concrete, plywood, wood, gypsum or fiber cement boards embedding fasteners, reinforcing tape & plastic or metal trim filling knots, dents, splits, nail holes & correcting other minor surface imperfections prior to finishing . Hard finish gypsum putty is Eco-friendly product, which have low Volatile Organic Compound (VOC) levels bearing little or no adverse effects to the environment. Its components contain no harmful chemical additives, creating a safe living environment for you & your family.
ADVANTAGES:
- • Ultra fine gypsum base product with special additive to increase the adhesion and the workability.
- • Use in smoothing internal cement and gypsum mortar with high thickness up to 5cm without cracks and with high strength.
- • High spread rate with perfect coverage.
- • Recommended as decorative putty and to the 1st layer of painting putty.
- • Color: White.
SURFACE PREPARATION:
The surface must be structurally stable, level and dry. Make sure the surface is clean and free from contaminants such as dirt, dust, loose material, oils and chemicals .
APPLICATION GUIDE
- 1.Mixing Stir Hard finish Gypsum Putty briefly to attain a creamy, smooth and homogenous consistency. The mixture is ready-to-use. Note: Do not add water to dilute the consistency of the premixed putty. This could lead to cracking & excessive shrinkage.
- 2.Application Use several light strokes to cover regular application areas. If necessary, put a mesh tape on top of the crack or joint before applying the mixture. Build up a smooth, flush surface, allowing each coat to dry completely. Sand the final coat prior to finishing.
- 3.Finishing Follow the paint manufacturer’s instruction regarding priming and application of further paint finishes.
COVERAGE
To fill joints between gypsum boards , plywood or fiber cement boards , 1 kg of EXTRA 120 Gypsum putty covers approximately 3 : 3.5 linear meters of tapered joints at 15:18 cm wide To smoothen plywood surfaces , 1 kg of Hard finish gypsum putty covers approximately 4 : 4.25 sqm per coat .
PACKAGING
12:12.5 kg
STORAGE & SHELF LIFE
Store in a dry place. Hard finish Gypsum Putty will remain usable 12 months from date of manufacture.
Red plaster hard
Heliopolis Alpha plaster Extra Super Nano
The technical specifications of Heliopolis gypsum molding plaster work in the field of sanitary works molds, tableware, porcelain, antiques , statues , Cornice and decoration industry and Casting of dental molds
Chemical Specifications
Constituents | Typical PCT |
---|---|
Crystal water | 5 : 7 |
Hemi-hydrate “ Caso4.½ H20” | 94.00 min. |
Insoluble Residue | 1 .00 max. |
Fe2O3 | 0.07 max. |
Cl | 0.015 max. |
CaO | 37 : 38 |
So3 | 52 : 54 |
Moisture | 0.00 |
Physical Properties of the product:
Degree of whiteness | 96 min |
---|---|
Water / plaster ratio | 25 -100 % |
Initial setting time | 15 : 20 minutes |
Final setting time | 30 – 35 minutes |
Fluidity | 150 – 240 mm |
Water absorption | > 8 % |
Bending strength | >99 kg/cm2 |
Compressive strength | >325 kg/cm2 |
Fineness, Retained On sieve ( 100 mesh) | zero |
PACKAGING
in 25 30 & Kg. Paper or P.P. bags as the standard product, and/or according to the customer requiremen